Majestic RSW 401, Быстрый старт

Страница: 10 / 11

P.3
LISTENING TO THE FM RADIO
1. To turn on the radio, press SLEEP/RADIO once, the display shows “ ON ” and then the radio frequency readings in
Mhz.
2. Press / to tune the radio to a desired station. Press and hold / to scan for the next clear station.
3. To adjust the volume, press VOL once, the display shows “ L07” , press / to adjust volume from L01 (minimum)
to L15 (maximum)
4. Press to turn off the radio.
Remark: keep your radio away from fluorescent lamps or other electronic devices, which may cause interference to the
radio.
USING THE PRESET MEMORY
This clock radio features a total of 10 preset memories of FM stations. These allow you to preset your favorite stations
and access them quickly.
1.
Turn on the radio and select a radio station you like to memorize.
2. Press and hold the SET until “ ME ” appears and “ 01 ” flashes. Press SET once to store Memory 1.
3. Press or to select another station you like to memorize. Then press and hold SET until “ ME ” appears and “ 01 ”
flashes. Press or once, “ 02 ” appears. Press SET once to store Memory 02.
4. Repeat Step 2 to 3 to preset memories 3 through 10.
5. To access a preset station at any time, press the SET one at a time while the radio is on.
TO USE THE SLEEP TIMER
1. Press the RADIO/SLEEP to enter the sleep mode. The sleep icon “ SL ” and the sleep time “ 05 ” (5 minutes) and will
flash on the display.
2. Press the RADIO/SLEEP again as needed to adjust the sleep timer from 5, 15, 30, 45, 60, 75, 90 & OFF minutes..
3. When the display changes back to show the time, press the RADIO/SLEEP twice to show the sleep time remaining.
4. The radio will play for the programmed sleep time and then shut off.
5. To turn off the radio before the sleep time has elapsed, press
once.
TO USE THE WEATHER STATION
There is a built-in humidity sensor in your unit to make the weather forecast. There are four types of weather display in
your weather station:
SUNNY
SUNNY AND CLOUDY
CLOUDY
RAINY
Remarks: for better use of your weather station, place it at a location with open air circulation e.g. close by an open
window. Placing it at air-conditioned environment will affect its accuracy.
After your weather station is powered up, it will take around 24 hours to get stable. The weather icons on the display give
a reference to the next 12-24 hours weather conditions. It may not match with the current weather condition outside
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused by electro-static discharge or
other interference, unplug the DC jack to disconnect the AC power (and remove the backup battery). The clock radio will
be reset to default settings and you need to set it again.