Majestic Prophonic Snare Drum, Руководство пользователя

Страница: 6 / 8

Adjusting The Individual Cables
A. Trigger One-Starting from the left, turn on trigger one making sure the cable is completely disengaged and is
not touching the bottom head.
1. While striking the drum at a fortissimo level, begin turning the thumbscrew clockwise until the
cables begin to engage. As the cables begin to engage, continue striking the drum and turning
the thumbscrew simultaneously until the desired sound is produced.
2. Release trigger one
B. Trigger two-Turn on trigger two making sure the cable is completely disengaged from the bottom head.
1. While striking the drum at a mezzo-forte level, begin turning the thumbscrew clockwise until
the cables begin to engage. As the cables begin to engage, continue striking the drum and turning
the thumbscrew simultaneously until the desired sound is produced.
2. Release trigger two
C. Repeat this process for triggers 3 and 4 at mezzo-piano and pianissimo respectively.
D. Turn on all four triggers-Your Prophonic Snare wires are now finely tuned to work together across the entire
playing area at all dynamic levels.
*** Following these steps will insure that each individual cable set is tuned within it’s intended dynamic range.
Once tuned, and according to the taste of each player, all cables can either act together to produce a
consistent snare timbre throughout all dynamics, or can act alone as individual snare timbres.
Removing Snares
You may wish to change a set of snares to create your own combinations with additional optional Majestic cables.
Simply lower the desired trigger and, using a drum key, unscrew the desired cable on the BUTT side followed by
the trigger side. Leave the Master switch on! It has been designed to accommodate this operation with speed and
ease, and the player should be able to change a snare cable in less than one minute.