Majella MCVC, Руководство по самостоятельной сборке

Страница: 3 / 15

MCVC
DIY Manual
©2019 Majella Audio
3
Requirements
The kit contains the PCB with all SMD parts
pre-soldered, panel and all electrical
components to finish the module. You will
need (as a bare minimum): basic soldering
tools and a Digital multimeter to finish this
module.
Required tools:
•
!
Soldering iron/station
•
!
Soldering tin
•
!
Wire cutter
•
!
Multimeter (minimal 3 decimals)
•
!
Trim screwdriver (flat)
•
!
2 mm Allen key (hex key)
•
!
Nut driver (plier, at own risk)
Bill of materials (BOM)
To start, it is good practice to check if the kit
is complete. We double check the kitbags,
but its never a bad idea to triple check.