Majella MCVC - Expansion, Руководство пользователя

Страница: 3 / 6

MCVC
User Manual
©2018 Majella Audio
3
OVERVIEW
Each voice has the same outputs: Gate,
pitch and velocity.
1. VOICE NUMBER
Each voice has a number. When leaved
blank they will all be set to 18. The user can
fill in the segments to the preferred
numbers. The main MCVC will always be
voice 1-4. The first chaining will contain
voice 5-8. The third will contain 9-12 etc.
2. GATE OUTPUT
The GATE outputs, output a 5V signal
whenever a “note ON” is played on the
corresponding channel. The LED blinks red
to indicate when a note is played.
3. PITCH OUTPUT
This output converts Pitchbend MIDI
messages to a 0-5V CV-signal for
modulating/bending the pitch of oscillators.
Its initial state is 2.5V and it can bend it 2.5
octaves up or 2.5 octaves down. Of course it
can be used for other parameters as well.
4. VELOCITY OUTPUT
The Velocity outputs output a 0-5V control
voltage corresponding with the Velocity
data received, E.g velocity 127 gives a 5V
signal. Lower MIDI velocity values output
lower control voltages.