Ethernet to Fiber Optic Converter
Model: MT8110
◆
Brief introduction
MT8110 can reciprocally convert the signals of Ethernet and fiber optic. It
achieves to transfer the Ethernet signal by fiber which can reach to much longer
distance.
◆
Capability and feature
·Standard IEEE802.3 and 802.3u Fast Ethernet.
·10/100Mbps Ethernet and 100Mbps optic port.
·Full and half duplex communications.
·Surge and lightning influence protection, plus-and-play.
·LED indicator for work state
·Metal shell protects the device.
·External power supply.
◆
Connection and application
◆
Led indication
LED light
Function
State
Working
PWR
Power indication light
On
Power supply is being supplied
Off
No power
FX
LINK/ACT
100Base-FX port link
state indication light
On
100Base-FX is active
Blinking
Data is being transmitted
Off
100Base-FX is inactive
FX-FDX
100Base-FX port working
mode indication light
On
Full duplex
Off
Semi duplex
TX-100
10/100 Base-TX signal
indication light
On
100M signal
Off
10M signal
TX
LINK/ACT
10/100 Base-TX LINK
state indication light
On
100Base-TX is active
Blinking
Data is being transmitted
Off
100Base-TX is inactive
TX-FDX
10/100 Base-TX working
state indication light
On
Full duplex
Off
Semi duplex
◆
Parameters
Power supply
2.5w
Work current(mA)
200mA
Baud rate(bps)
Ethernet 10/100M, fiber optic 100M
Port connector
Ethernet:RJ45,fiber optic: ST/SC/FC
Error rate
≤10
-9
Power stabilization
0.2Mw/
℃
Data cache
1MBits
EMC
According to FCC part 15
Work temperature
（
℃
）
-20~70
Stock temperature
（
℃
）
-45~80
Relative humidity
0~95%
Dimension(mm)
95mm×70mm×26mm
IEEE standard
802.3,802.3u,802.3d
◆
Suitable fiber optic line
Multi-mode fiber optic line: 50/125, 62.5/125, 100/140um
