IWAP3102
- 6 -
Use U-shaped hoops, clamps, and screws to fix the device on the pole and
tighten the screws
Accessory installation
Installation of lightning arrester
A. Use a screwdriver to remove the grounding copper lug of the arrester;
B. Pull the pure copper yellow wire around 5mm and insert it into the copper
ear and pinch it with pliers. Pull the other end of the wire and connect it to the
ground net;
C. Fix the copper lug to the arrester with a screwdriver and tighten the screws;
D. Connect the N-type male end of the arrester to the N-type female end of the
device and tighten it, and connect the N-type female end to the jumper or
antenna and tighten it.
