MAISTERmicro
7
5
Overview
6
Environmental conditions
Safety notes
o
Keep the power cable away from hot objects, sharp edges and moisture. It must
not be covered for example by textiles or devices (including this device).
o
The power cable must not be bent or squashed. Make sure that it is always
unwound.
o
The power cable must not be a danger for example by strangulation or stumbling.
o
The device must always be tilt and skid resistant. Do not move the device when
switched on or / and in a filled state.
o
The device must not be placed on tablecloths, carpets or similar combustible
materials. Also the environment must be free of combustible materials.
o
The openings of the device must be kept clear.
The installation site must meet the following requirements:
o
A clean, dry interior with flat, firm and non-flammable surface.
o
A sufficiently large, clean work surface; free of debris.
o
A sufficient minimum distance to other objects of 7,5 cm at the sides and 30 cm
above the device. One side of the unit must be kept free. Do not remove the feet
of the device, these are also the distance of the unit to the ground. A minimum
distance of 2 meters must be adhered to interference-prone devices.
o
Protection from heat sources and direct sunlight.
o
A non-hazardous environment.
o
A room temperature between 15 °C and 32 °C with a maximum humidity of 85%.
