Maintronic PAC3200, Руководство по обслуживанию

Страница: 12 / 14

Programming PAC3200 Panel
9.1 Starting programming:
Press the 3 signed buttons in the shown se-
quence and keep holding them. The number
of saved programs is on the display (max32)
and the point on the right side of the display
lights up slowly (each second)
9.2 Set number of programs
Raise number of channels
Reduce number of channels
9.3 Set receiver channels to programs
Device must be in programming mode 9.1
Repeat step 9.1 until light blinks fast. (Every
half second)
1. With Buttons select your program
and wait for 2 seconds.
2. With Buttons you choose the
channel
3. With the Button you save.
9.4 Exit the programming mode
Press the 3 marked buttons in the shown
sequence and hold them....
In STEREO mode 2 points light up.
In MONO mode 1 point lights up.
9
9
No guarantee for technical changes, errors and
misprints!