background image

User Manual

Troubleshooting

COMPRESSOR IS NOT RUNNING

Problem

Solution

Fuse blown or circuit breaker tripped.

Replace fuse or reset circuit breaker.

Power cord unplugged.

Plug in power cord.

Thermostat set too high.

Set thermostat to lower temperature.

Cabinet in defrost cycle.

Wait for defrost cycle to finish.

CABINET TEMPERATURE IS TOO WARM

Problem

Solution

Thermostat is set too high.

Set thermostat to lower temperature.

Airflow is blocked.

Re-arrange products to allow for proper air flow. Make sure there is at least 

four inches of clearance from the fan.

Low refrigerant levels.

Contact a service technician to check refrigerant levels.

Door is slightly ajar.

Make sure door is completely closed.

INTERIOR LIGHT IS NOT WORKING

Problem

Solution

Poor switch connection.

Turn off light switch and turn it back on.

Bulb is not connected.

Make sure the bulb is correctly inserted in the socket.

Bulb has burned out.

Replace the bulb.

CONDENSATION IS COLLECTING ON THE CABINET AND/OR FLOOR

Problem

Solution

Gasket is not sealing properly.

Clean, repair, or replace the gasket as necessary.

Relative humidity is above 60%.

Move unit to area below 60% relative humidity or lower humidity level.

Mainstreet Equipment

8

Содержание 829GMC12B









Отзывы: