12
Assembly Instructions for Chair
14.
Insert the tenon of two Side Stretchers (L) into the mortises of assembled Chair Back Legs (C and D).
Make sure that the slant holes on the side stretchers will face the floor when the unit is turned upright.
15.
Attach the assembled Chair Upper Side Rails (J) to the Chair Back Legs (C and D) with two Wood
Dowels (10) and insert both Side Stretchers (L) into the Front Legs (H and I) respectively. Insert four
50 mm Bolts (4) with the Small Washers (6 and 7) through the slant holes on
the
Chair Upper Side Rails
(J) and screw into place.
4
6
7
10
L
L
J
J
C
D
J
I
H
L
C/D
C/D
H/
I
Small
Lock Washer
(4 used in this step)
⑥
Small
Flat Washer
(4 used in this step)
⑦
Wood Dowel
(2 used in this step)
⑩
M6 x 50 mm
Bolt
(4 used in this step)
④
