Version
：
V1.0
（
2022.10
）
Copyright © 2022 Mainlink All Rights Reserved
14
Installation
Air
1.Installing the air unit on your drone
Fixed the device and RF cable on your drone. Install the antenna. Pay attention to the
connection of the antenna to tighten. Make the antenna downward. There is no metal or
shielding within 20cm of the antenna.
2. Connecting the gimbal
Connect the gimbal to one ethernet of MK22. Connect UART1 to flight control. If you
need to control the drone with RC, please connect SBUS_OUT of MK22 to flight control
SBUS IN.
Attention: If your gimbal only has HDMI/SDI/AV interface, please refer to the
section of “MK22 with M05E”. When using the SBUS, please pay more attention to the
power.
Do not put the antenna near the motor or ESC, otherwise the device will be interfered.
Ground
