版本：
V3.0
（
2018.09
）
第
5
页
Receiver connection diagram
Connect the HDMI of receiver to LCD display.
And connect the antenna ,fasten it.
Installation notes
：
1.Keep the antenna away from metal equipment of drone, and the antenna should have wide space
within 20cm to other objects to ensure efficient transmission;
2.Make a proper planning about frequency of all wireless equipment on UAV. Otherwise it will cause
the equipment to be unable to use normally .
Usage
S2 HD video transmitter achieves long distance HD video transmission, suitable for real-time
applications.
Channel setting
The transmitter and receiver are in the same channel by default. After the transmitter and receiver
are installed normally, HD video transmission can be realized.
To switch the channel, follow the steps as follows:
1.The product has two RF channel. Press “SW” on the transmitter, one of the signal indicator
CH1/CH2 lights. Green LED means the current channel is in use.
2. Press “SW” of receiver, the OLED will display current channel and
indicate the current signal strength. Since transmitter has two channels,
each channel support two videos input(HDMI and IP), the receiver can
