17
Kleiss MCS120-24 System Manual v.1.1 March 2021
|
www.MainlineControlSystems.com
If cutting through steel or cast iron, grease the
cutter and pilot drill with the cutting grease for
better drilling results.
Grease rod with silicone grease for a smooth
installation. Then, install the drilling rod through
the hot tapping device and dome.
Install the cutter onto the drilling rod and tighten
the cutter.
Retract the drilling rod and cutter completely into
the drilling dome. No part of the cutter should be
visible.
When retracted into the drilling dome, the cutter
should be in the position as shown in the picture.
