Maine Wood Heat Company LE PANYOL 100, Руководство по монтажу

Страница: 12 / 24

Chapter 3: Design and construction
www.mainewoodheat.com for the latest design information
23
AFTER CONSTRUCTING THE CORE:
SMOKE THROAT ELEMENTS AND
ADAPTORS
For the American market, Le Panyol has
developed a second set of arched door elements,
also made of Terre Blanche. When mounted,
this new set of paired elements forms the smoke
throat, a rectangular opening that measures 3
1/4” x 11”. To complement these new elements,
the Maine Wood Heat Co., has designed and
developed a heavy gauge stainless steel adaptor to
be mounted with tap con screws and high temp
silicone or refractory mortar to the top of the
door and throat elements. The adaptor makes
the transition from 3 1/4” x ll” to an 8” round in
10 “ height. Using locally available elbows and
stainless pipe, the exhaust can be vented in any
direction, into either a masonry chimney or a pre-
fab chimney.
CHIMNEY SUPPORT
It is not recommended that a heavy
masonry mass be built resting on any part of
the masonry core. Any masonry chimney built
should be supported by the veneer walls, not
by the oven core. If a short (2’ to 6’) masonry
chimney is built directly above the throat and
supported by angle iron and the veneer walls, a
standard clay flue tile 8.5” x 12.5” can be centered
over the throat and then rest on the refractory
elements.
Flue tiles should be set with refractory
mortar and be free to move relative to the
surrounding masonry.
CAPPING & WEATHERPROOFING
Outdoor ovens do not require a chimney
damper but will benefit from a chimney cap.
THE TERRE BLANCHE OVEN CORE
AND HEARTH ELEMENTS MUST BE
PROTECTED AT ALL TIMES FROM
MOISTURE (RAIN & SNOW). IF THE
CORE GETS OVERLY WET IT CAN BE
SUSCEPTIBLE TO CRACKING FROM
FROST OR STEAM EXPANSION. PROTECT
YOUR LE PANYOL BY CREATING A
WATERPROOF ROOF OVER THE OVEN
AND CAPPING YOUR CHIMNEY.
DAMPERS
Indoor ovens benefit greatly from a damper,
which serves to assist in draft regulation and limit
heat loss when the oven is not in use. A standard
cast iron pivoting stove pipe damper or airtight
spring loaded chimney top damper may be used.
Custom dampers can also be fabricated.
FLUE INFORMATION
See model specific UL information at the end of
this booklet.