STEP Two:
ATTACH SIDE RAILS
To attach the Side Rails, align the metal male
component on Side Rail with the female component
on the metal bracket on the Head Post. Press down
until it “clicks” into place. Repeat with the other Side
Rail and Head Post. It is recommended to attach
both Side Rails to the Head Board first then repeat
the connections on the Foot Posts.
Notice there is a Center Leg attached to the middle of
the Center Support. Before positioning the Center
Support (Queen and King beds only) remove the two
Thumb Screws from the Center Leg. Turn the leg into the
upright position, perpendicular to the Center Support,
and realign the Thumb Screws . Tighten down and adjust.
Place the Center Support into position then lay the Bed
Slats on the Bed Rails as pictured. You are now ready to
place your foundation and mattress (not included).
STEP THREE:
INSTALL CENTER SUPPORT & BED SLATS
Center Rail and Leg
Center Support
866-366-3505 M-F, 9-5
Содержание Calvin Bed
Страница 1: ...Calvin Bed Assembly Instructions...
