DVR operation manual
42
Pic 5.18 Netservice
【
PPPoE setup
】
Pic 5.19 PPPOE
Enable
:
Reverse■ means choose,setting can become effective.
Input the user name and password that ISP
(
Internet service provider
)
provides. After saving it reboot
up your system. Then the DVR will build a network connection based on PPPoE. The IP address will
change into dynamic IP address after above operation is well done.
Operation
:
After PPPoE dialing successfully look up the IP address in the [IP address] and obtain the
current IP address. Then use this IP address to visit the DVR through user port.
【
NTP setup
】