maile M-2028 Скачать руководство пользователя страница 10

    disposing the wastes, abandonment and residues.

12. Product Care

The thermometer is provided with a calibration mo-

de (object mode / body mode), which can be used to 

calibrate the thermometer. During the service life, 

there is no need to calibrate the thermometer. If the 

service life is due and the thermometer is still being 

used, it is necessary to send it back to the manufac-

turer for a calibration. 

If the following problems are encountered when 

using the thermometer, please find out the solution 

from the maintenance instructions. If the problem 

cannot be solved, please contact with the after-sales 

service. 

12.1  No value can be shown on LCD display screen: 

    If the thermometer is being used to measure the 

    human temperature, and it is lower than 32

 or 

    higher than 42.9

, LCD display screen will not 

    be shown but “Lo” or “Hi”. 

12.2  “Hi” is shown on LCD display screen: When 

    “Hi” is shown on LCD display screen, it means 

    that the measurement scope is exceeded. 

12.3  “Lo” is shown on LCD display screen: When 

    “Lo” is shown on LCD display screen, it means 

    that the measurement scope is not reached. 

12.4  When           is shown on the LCD display screen, 

    it means low battery and it is necessary to replace 

    a new battery in time. 

12.5 There is no display or the display is abnormal 

    on LCD display screen, please dismantle the bat-

    tery and re-install it  

13 Storage and Transportation Environment

    

Environment temperature: -20

 ~ + 55

  ■

Relative humidity: 

85% RH. 

  ■

Atmospheric pressure: 70kPa ~ 106kPa. 

The reason displaying “Lo” or “Hi” Suggestion

The temperature is influenced by 

hair and sweat

The temperature is influenced by 

the air stream

The measurement distance is 

too far

Make sure that the forehead is not 

covered by anything when mea-

suring the temperature 
Make sure that the air is stable when 

measuring the temperature

Please make sure that the measure-

ment distance shall not be more than 

5cm

Enter a room at a high temperature 

from a place at a low temperature

Please wait for 10 minutes, only when 

someone adapts to the environment 

can the temperature be measured.

-09-

Содержание M-2028















Отзывы: