Operation Manual MA 33
8100092 Rev. 9
21
19/08/2019
4.3.2 Choose Program Options
Choose the data connection, the program settings and program language (Figure 7):
•
Choose Data Connection:
•
MAICO Database:
starts the parallel setup of the MA 33 Software and the
MAICO Database. In case the MAICO Database is alreadly installed
deinstallation of the program will be requested prior to installation (Figure 13).
•
Noah:
connects the MA 33 Software to Noah.
•
BDT/GDT:
allows the connection of the MA 33 Software to your existing
practice management software.
•
EssiConnect:
connects the MA 33 Software to EssiConnect.
•
Choose Program Settings
•
International:
Default settings for International version preselected.
English language is selected by default and can be changed.
•
Americas:
Default settings for Americas version preselected. English
language is selected by default and can be changed.
•
Essilor:
Default
settings
for
Essilor
version
preselected.
French language (Français) is selected by default and can be changed.
•
Audiofon:
Default settings for Audiofon version preselected.
Polish language (Polski) is selected by default and can be changed.
•
Audioprotesi:
Default settings for Audioprotesi version preselected.
Italian language (Italiano) is selected by default and can be changed.
•
Choose Program Language
: sets the language for operating the MA 33
Software. This setting can be changed again later on while running the MA 33
Software.
Figure 7
NOTE
: The choice of a program language will be set as default. Nevertheless, it is possible
to switch the language later in the settings.
In case MAICO database is selected the installation process for the MAICO database will
be initiated parallel to the installation of the MA 33 Software and show the same steps.