Maico ER-UP/GH, Монтаж и эксплуатация

Страница: 7 / 36

5. Safety instructions
7
WARNING
Risk of injury when working at heights.

Use appropriate, certified climbing aids
(ladders). Stability should be ensured, if
necessary have the ladders steadied by
a 2nd person.

Ensure that you are standing securely
and cannot lose your balance and that
there is no one under the unit.
WARNING
Exercise caution when handling
packaging materials.

Store packaging material out of the
reach of children.
DANGER
Danger of injury from damaged fan.

Switch the fans off immediately if you
discover damage or faults that could
endanger persons or property.

Prevent the unit from being switched
back on until it has been fully repaired.
CAUTION
Intended operation not ensured if
installed incorrectly. A fan not installed
correctly may result in operation not as
intended.

Only install fan in accordance with the
planning documents.

In particular, note the information on
ventilation channels and sound deadening.
DANGER
Risks from parts which may affect the
ventilation system which are added or
modified at a later date. Parts (range
hood, air-ventilated fireplace etc.) which
are added or modified at a later date may
result in health risks and operation which
is not permitted.

Parts may only be added or modified
at a later date if system compatibility is
established/ensured by a planning office.
If using an exhaust air range hood or air-
ventilated fireplace, this must be accepted
by a professional chimney sweep.
DANGER
Danger from operating with the fan not
fully mounted. Electric components are
a potential source of electric shock.

If the unit is open, all off the supply
circuits must be switched off (mains fuse
off), secured against being accidentally
switched back on and a visible warning
sign positioned.

Only operate the fan when it is
completely installed.

Do not cover the fan.
DANGER
Risk of injury and health risk in the
event of changes or modifications or
if components which are not permitted
are used.

The unit may only be operated with
original components.

Changes and modifications to the units
are not permitted and release the
manufacturer from any guarantee
obligations and liability, e.g. if the housing
is drilled at a point which is not permitted.