Maico ER-A, Руководство по установке

Страница: 48 / 136

12 Operating the unit
48
Installation
1. Fit extraction socket as described Conversion
of exhaust socket for air outlet towards rear
[
}
40] .
2. Connect the connection duct to the extraction
socket and the branch in the flushing pipe of
the concealed cistern. Make sure the connec-
tions between the connection duct and the ex-
traction socket and the branch are tight.
3. For installing fan insert and cover → Instruc-
tions for covers.
12 Operating the unit
If the unit is switched on and off manually,
function is not always ensured in accordance
with DIN 18017-3.
ER EC fans run at 30 m³/h in base load opera-
tion (factory setting).
A light switch or separate switch can be used to
switch to
full load operation with 60 m³/h .
The unit control is located in the cover: ER-AH ,
ER-AK , ER-AB have automatic functions with
unit parameters that can be set: Covers: Functions
[
}
33] .
• ER-A: Standard model
• ER-AK: Comfort model
• ER-AH: Model with humidity control, barrier-free
• ER-AB: Model with motion sensor, barrier-free
For full load operation, a
start delay of 60
seconds and an overrun time of 15 minutes are
specified at the factory .
Ensure sufficient supply air during opera-
tion.
13 Spare parts
Spare parts may only be sourced from and
fitted by a specialist installer.
Designation Article no.
ABSK ER GH
exhaust socket E059.2046.0000
Shutter support with
backflow preventer
KA RK K E093.0608.0001
AES ER EC
air outlet element E059.2053.0000
AEH ER EC
air outlet element E059.2054.0000
In case of questions, please contact:
Maico Elektroapparate-Fabrik GmbH
Steinbeisstraße 20
78056 Villingen-Schwenningen, Deutschland
Tel. +49 7720 694 445
Fax +49 7720 694 175
E-mail:
ersatzteilservice@maico.de
Spare parts can be ordered at
www.shop.maico-ventilatoren.com .