Operation Manual easyTymp
8111254 Rev. 7.0
27
02/16
Operating from this screen:
-
takes you to the Setup screen.
-
selects the highlighted protocol and returns to the
Test
screen.
-
buttons will bring you to the top or bottom of the protocol list
respectively.
-
buttons allow scrolling up or down to select one protocol.
5.3 Done
Figure 28
easyTymp will automatically go to the
Done!
screen when
it has finished testing (Figure 28).
From here, measurements of both ears can be reviewed,
printed and/or saved. Of course, you can also directly start
a new measurement in the Test screen from here.
Operating from this screen:
-
:
Top left button will print the test results of the left and right ear. Note
that there should be a connection to the printer by placing the easyTymp in the
cradle.
-
:
Top middle button will save the measurement of both ears.
-
:
Top right button will present a popup message say
ing “Delete current
or both ears?” the top left button will cancel the process. The top middle button
will delete the data of the currently selected ear and bring you back to the
Test
screen. The top right button will delete data for both ears and bring you back to
the
Test
screen.
-
buttons will select respectively right or left ear for testing and bring you
back to the
Test
screen. The existing data of the selected ear will only be deleted
after the probe detects that it is in the ear with a proper seal.
-
buttons make you scroll through the different test results. When viewing the
first or last test of an ear, pressing up or down respectively will bring you to the
test results of the other ear.
Содержание easyTymp
Страница 1: ...Operation Manual easyTympTM...
Страница 2: ......
