Mahr umaxum II, Инструкция по эксплуатации, Страница: 18 / 72

18
5.1 Changing Measurement Direction (M1) [S]
1) Simultaneously press and hold M/OFF (1), then quickly press and release inch/
mm (2) once to enable the setup mode. ( M1 icon appears in the lower left cor-
ner of the LCD) (Figure 1).
Figure 1 -
Entering the Set-Up Mode
2) Press and release ZERO/ON to select the desired measurement direction signi-
fied by the “ R ” icon for reverse mode and no icon for the normal mode (Figure
2).
Figure 2 -
Changing Measurement Direction
3) Press and release M/OFF until it returns to the gaging mode. No “ Mx ” icon is
displayed. Where “ x ” could be 1, 2, 3, 12, 23, etc.