Mahr MarSurf PS 10, Перевод оригинальной инструкции по эксплуатации

Страница: 25 / 26

21 Mahr GmbH, MarSurf PS 10
6820601 Geometry standard PGN 3,
for dynamic calibration via
Ra , Rz , RSm ; sinusoidal groove
profile, profile depth approx. 3 µm
(0.00002 in) , groove spacing
approx. 0.12 mm
(0.005 in)
6820605 Geometry standard PGN 10,
for dynamic calibration via
Ra , Rz , RSm ; sinusoidal groove
profile, profile depth approx. 10 µm
(0.0004 in)
, groove spacing approx.
0.20 mm (0.008 in)
9027715 Mahr calibration certificate for PGN
6980102 DKD calibration certificate for PGN
6299054 "MarSurf XR 20" evaluation
software (16-language toggle),
incl. Mahr license key
4102552 "MarCom Professional" software
for applying measuring values of
MarSurf PS 10
4102551 "MarCom Standard" software
for applying measuring values of
MarSurf PS 10
4102357 Data cable 16 EXu with Start key,
incl. "MarCom Standard" software
4102231 Wireless transmitter 16 EWe,
Bluetooth® Smart , range approx.
6 m
(20 ft)
, for transferring meas.
values from MarSurf PS 10 to a PC
with MarCom software
4102230 Wireless receiver, Bluetooth® Smart
6910427 MarSurf RD 18 C2 cylindrical drive
unit for measurements in the trans-
verse direction up to Lt = 4.8 mm
(0.19 in)
6111520 Probe PHT 6-350,
single-skid probe, stylus tip radius
2 µm, measuring range 350 µm
(0.014 in)
, for measurements on
level surfaces, in bores from 6 mm
(0.236 in) Ø to 17 mm (0.669 in)
deep, in grooves from 3 mm
(0.118 in) wide
8 Accessories,
spare and wear parts
Spare and wear parts
7053546 Standard for MarSurf PS 10,
incl. Mahr calibration certificate
3030057 Lithium-ion battery for MarSurf
PS 10, 3.7 V / 3150 mAh
7054131 Protective cap for ports on MarSurf
PS 10
Accessories
4413000 MarStand 815 GN measuring stand,
triangular pedestal, height 300 mm
(11.81 in)
4413001 MarStand 815 GN measuring stand,
triangular pedestal, height 500 mm
(19.69 in)
4413005 MarStand 815 GN measuring stand,
triangular pedestal, height 750 mm
(29.53 in)
6910435 Holder for attaching the cylindrical
drive unit of the MarSurf PS 10 to
the MarStand 815 GN measuring
stand or a holding device with Ø
8 mm
(0.315 in) clamping shaft
6710803 MarSurf ST-D measuring stand
6710807 MarSurf ST-G measuring stand
6910209 Holder for attaching the MarSurf
PS 10 (complete unit) to the ST-D,
ST-F or ST-G measuring stand
6910434 Hand-held support
6850720 Height-adjustable feet (x2) for
hand-held support 6910434
6851304 Holder for attaching the MarSurf
PS 10’s drive unit to the ST-D, ST-F
or ST-G measuring stand using the
6910434 hand-held support
6820602 Geometry standard PGN 1,
for dynamic calibration via
Ra , Rz , RSm ; sinusoidal groove
profile, profile depth approx. 1.5 µm
(0.00006 in) , groove spacing
approx. 0.10 mm (0.003 in)