Mahlkonig K30 ES, Руководство по эксплуатации

Страница: 12 / 24

G A S T R O N O M I E M Ü H L E N | H O R E C A G R I N D E R
Resetting the cleaning counter: Enter the menu by pushing and
holding both buttons for appr. 3 seconds. Scroll through the
menu with the single pre-selection button (pos. 8) until the dis-
play reads GRINDZ. From this point exit the menu by pressing
and holding both buttons for appr. 3 seconds. The counter will be
set back to Zero.
6.4.4 Disc counter
Furthermore the grinder is equipped with a disc counter that will
show DISC in the display after the defi ned amount of 100,000
single shots.
The grinder can still be used but the discs should
be changed regularly (see chapter 9) in order to
assure best possible grinding quality and speed.
• Resetting the disc counter: Enter the menu by pushing and
holding both buttons for appr. 3 seconds. Scroll through the
menu with the single pre-selection button (pos. 8) until the
display reads DISC. From this point exit the menu by pressing
and holding both buttons for appr. 3 seconds.
• For entering the PIN use the left potentiometer to change the
digits and press the single button to jump to the next num-
ber. The PIN is 0408.
• The counter will be set back to Zero and the display will read
PIN OK.
A disc change should always be carried out by
a trained service technician in order to assure
correct procedure and recalibration after the
change.
12
NEW