Compliance Information
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution:
Any changes or modifications not expressly approved
could void the user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Radiation Exposure Information
This device has been evaluated to meet general RF exposure
requirements. The device can be used in portable exposure
conditions without restriction.
Rating Label Definitions
Direct current symbol
This symbol represents FCC Declaration of Conformity and
compliance.
The UL Listing mark for the U.S. / Canada indicates that this end
product meets the standards set by the third-party certification
company UL (Underwriters Laboratories) a safety organization
that sets industry-wide standards on new products, for the U.S.
and Canada.
