Setup
1. Remove the cover and inner lid and insert the pin of the
supplied power cable into the power jack on the bottom
of the diffuser. Insert the other end into a USB power source,
such as a computer or a
5V USB adapter
(not included)
and
plug into an electrical outlet.
2. Fill the tank with room temperature water up to the MAX
level line.
3. Add 2 - 3 drops (~0.1 - 0.15 mL) of essential oil.
4. Place the inner lid and cover back on then set the diffuser
on a flat, sturdy surface.
5. Press the
Mist
button on the front of the diffuser to turn ON.
CAUTION:
Using more than the recommended amount of oil
may cause the diffuser to get clogged and not operate properly.
When finished using, drain any remaining water from the tank,
carefully rinse, and let dry. If you would like to more thoroughly
clean the diffuser, use a small amount of neutral detergent,
such as dish soap.
2
3
4
ON1H 2H 3H
1
ON1H 2H 3H
ON1H 2H 3H
ON1H 2H 3H
5
