DIAGNOSTIC MANUAL MAN-00201
QUANTO
EMS
SEP 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
`
P1704
GEAR NEUTRAL SIGNAL IS NOT PLAUSIBLE
GEAR NEUTRAL SWITCH
The gear neutral switch is a normally closed switch located on the trasnsmission which provides
information on gear neutral position to EMS ECU
DTC INFORMATION
PROBABLE CAUSES OF FAILURE
NORMAL OPERATION
Ignition ON
When there is valid gear change , gear neutral sensor signal
changes accordingly
DTC DETECTING CONDITIONS
Ignition ON
EMS ECU supply voltage 8-16V
When there is valid gear change , no change in gear neutral
sensor signal
DTC REACTIONS
Start stop will not work
HEALING CONDITION
Ignition Off/On
Loosened gear neutral
sensor
Open /short wiring harness
Faulty gear neutral sensor
313