Mahindra MB PLOUGH, Руководство по обслуживанию, Страница: 3 / 16

MAHINDRA APPLITRAC
INSTRUCTIONS
Instructions to use the implement
 To check the fastener are properly inspected and properly tight according to
suitable torque.
 Draft control used suitable HP tractor for operation and during taking turn
always lift implement. Proper use of tractors DC & PC lever.
 The field is ploughed in runs parallel to each other.
 It starts at one boundary of the field and ends at the opposite with turns
being made on the headlands.
 It is usually the most field efficient system and if equipment is correctly
setup and operated should not leave furrows in the field.
 Three point linkage is suitable for category 1 type implements failure to turn
of the tractor and implements power and to wait for the machine to stop
moving
 Completely before repairing or adjusting the machine. You risk the
possibility of getting hands or clothing caught in or on the PTO or in a
moving disk, belt or chain while attempting to work on a machine while it is
running. Likewise, bystanders or others working on the machine can get
entangled in it.
 Failing to block raised implement when working on them. Rider on the
implement. Rider can be thrown from or slip off. They can be either run over
by the implement or fall in to it.
 Not paying attention when working with machine. operators needs to react
to changing conditions as the implement does it work.
 Make sure all equipment is in good working order if required.
 When parking equipment, block the wheels so that the machine will not roll.
Hydraulically raised equipment should be lowered and should have the
transport lock engaged when parked or blocked.