Mahindra BOLERO NEO N10 2021, Руководство пользователя

Страница: 25 / 289

2-6
© Copyright Mahindra and Mahindra Ltd. 112020
2 2..3 3 B Bu ullb b S Sp pe ec ciiffiic ca attiio on n
L La am mp p B Bu ullb b W Wa atttta ag ge e
N No o.. o off B Bu ullb bss p pe err
V Ve eh hiic clle e
Head Lamp - Low Beam
H7 55W 2
Head Lamp - High Beam
H7 55W 2
Front Turn Signal Lamp
21W 2
Side Turn Signal Lamp
(Fender)
5W 2
Side Turn Signal Lamp
(ORVM)*
LED* 2
Static Bending Lamp *
H1 55W 2
Front Position Lamp *
LED* / 5W LED* / 2
High Mount Stop Lamp
LED* / 10W LED* / 2
Brake Lamp
LED* LED*
Rear Turn Signal Lamp
16W 2
Rear Position Lamp
LED* LED*
Reversing Lamp
16W 2
Front Fog Lamp *
19W 2
Rear License Plate Lamp
5W 2
Interior Lamps Bulb
10W 1
Puddle Lamps *
LED* LED*
* select models only, subject to LED serviceability
2 2..4 4 F Fu usse ess a an nd d R Re ella ayyss
A fuse is the most common electric protection device. The fuse is
placed in an electrical circuit, so that when current flow exceeds
the rating of the circuit/fuse, it blows off. The element in the fuse
melts, opening the circuit and preventing other components of the
circuit from being damaged by the over current. The size of the
metal fuse element determines the rating. Once a fuse blows off, it
must be replaced with a new one.
Switch the ignition and all electrical equipment OFF before touching
or attempting to change a fuse.
Replacement fuse must be with the same rating as the one you
have removed.
You can identify a blown fuse by a break in the filament. All
fuses except high current fuses are press fit.
Never touch fuses with bare hands. Always use a fuse puller to
remove and refit the fuses. The fuse puller is available in the IP
fuse box.
G GE EN NE ER RA AL L