Mahindra ALTURAS G4 2019, Руководство пользователя

Страница: 209 / 340

© Copyright Mahindra and Mahindra Ltd. 092018
5-57
5.21 Rain Sensing Wiper (if equipped)
5.21.1 Wiper AUTO Position
The wiping speed is adjustable by the volume switch with the wiper
switch in AUTO position.
• It is recommended to keep the auto wipe in ON position while
driving in rains and/or roads with water pools/standing
water
• When the wiper switch is in the “AUTO” position, the wiper
will operate once if the initial engine start is made. This may
wear the wiper blades prematurely (especially in winter).
Therefore, other than rainy days, set the switch to the “OFF”
position. In winter, ensure that the wiper blades are not
frozen and are not stuck to the windshield. Otherwise, this
may cause some damage to the wiper motor
• If you use only the wipers when the glass is dry, this could
scratch the glass and wear the wiper blades prematurely.
Use the wiper with the washer when the glass is dry
• Turn the wiper switch to the “OFF” position before any car
wash to avoid unwanted operation of the wipers
• When it is not raining, place the wiper switch at the “OFF”
position
When the wiper switch is in the “AUTO” position, this sensor
detects the amount of rainfall, turns on the wiper, and controls the
intermittent wiper intervals.
5.21.2 Automatic Light & Rain Sensor (if equipped)
Y4E103
Y4E105
Auto light &
rain sensor
CONVENIENCE SYSTEM I