Mahindra 60 Series, Руководство оператора, Страница: 47 / 111

46
60 Series 2WD/4WD, Model - 8560
Toplink
It is used to attach the implement and control its inclination
front-to-rear with respect to ground. The distance between
its two ball-joints can be increased or decreased by rotating
the turn-buckle as follows,
1. Loosen the locknut (A).
2. Clockwise rotation of turn buckle will decrease the
distance.
3. Anticlockwise rotation will increase the distance.
4. Tighten the locknut (A) after desired adjustment.
Draft Sensing Bracket
Draft sensing bracket transfers the toplink force to the draft
sensing mechanism. It has three holes (A), (B) and (C) for
hitching the toplink.
Maximum achievable depth of implement increases as the
toplink is shifted from top to lower holes.
Top Hole (A) : Attach toplink to hole (A) where higher
and medium draft sensitivity is required
Viz. Cultivator in soft soil.
Centre Hole (B) : Attach toplink to hole (B) where medium
to Low draft sensitivity is required
Cultivator in Hard soil and Plow in soft
soil.
Lower Hole (C) : Attach toplink to hole (C) where very
Low draft sensitivity is required Viz. Plow
in hard soil.
Contact your Mahindra dealer to understand hitching
position of toplink for specific implements used by you.
Telescopic Lower Links
Telescopic Lower Links are provided for ease of hitching the
implement as follows,
1. Slowly back tractor into position to align the lower links
with implement pins.
2. Park tractor safely.
3. Raise lock lever (D) and pull link (E) to extend as needed.
4. Connect lower links to the implement. Sit on operator’s
seat and start engine.
5. Back tractor until each lock lever snaps and secures each
lower link in the lock position.
The Lower Link is available with adaptability of Cat–2
implements.
A
B
C
D
E
D
E
Th ree P oi nt L i nkag e
A
D
E
D
E