Mahindra 4010 HST Скачать руководство пользователя страница 13

Страница: 13 / 159

Introduction & Description

►

TRACTOR AN INTRODUCTION

The word, ’Tractor’ has been derived from ‘Traction’ which means pulling.

A Tractor is required to pull or haul an equipment, implement or trolley which are coupled to the

Tractor body through suitable linkage. A Tractor can also be used as a prime mover as it has a

power outlet source which is also called Power Take or PTO shaft.

In this book the operating, maintenance and storage instructions for all models of Mahindra Diesel

Tractors has been complied. This material has been prepared in detail to help you in the better

understanding of maintenance and efficient operation of the machine.

If you need any information not given in this manual, or require the services of a trained mechanic,

please get in touch with the Mahindra Dealer/Distributor in your locality. Dealer/Distributors are kept

informed of the latest methods of servicing Tractors. They stock genuine spare parts and are backed

by the Company’s full support.

Through this manual. The use of the terms

LEFT, RIGHT, FRONT and REAR must be

understood, to avoid any confusion when

following the introductions. The LEFT and

RIGHT means left and right sides of the

Tractor when facing forward in the driver’s

seat, Reference to the FRONT indicates the

radiator end of the Tractor, while the REAR,

indicates the drawbar end (illustration B)

When spare parts are required, always specify

the Tractor and engine serial number when

ordering these parts. (See illustration A). This

will facilitate faster delivery and help ensure

that the correct parts for your particular

Tractor is received. The tractor serial number

is punched on a plate attached to the left hand

side of the engine body (illust. A), For easy

reference, we suggest you to write the number

in the space provided in the owner’s personal data.

illustration A

( Front, Rear,Left,Right Portion)

Содержание 4010 HST
































































































































































Результаты поиска

Содержание 4010 HST

Отзывы:

Mahindra 4010 HST, Руководство оператора, Страница: 13 / 159

Результаты поиска

Содержание 4010 HST

Отзывы: