background image

2

ABOUT THIS MANUAL

This  Manual  has  been  prepared  to  assist  you  in  following  the  correct  procedure  for  

break-in, operation and maintenance of your new Mahindra tractor.

Your tractor has been designed and built to give maximum performance, with good fuel 

economy and ease of operation under a wide variety of operating conditions. Prior to deliv-

ery, the tractor was carefully inspected, both at the factory and by your Mahindra dealer, to 

ensure that it reaches you in optimum condition. To maintain this condition and ensure trou-

ble free performance, it is important that the routine services, as specifi ed in this manual, 

are carried out at the recommended intervals.

We have enclosed a page on new tractor inspection sheets. The fi rst sheet is the dealer's 

copy and should be removed by the dealer after the inspection has been carried out. The 

second sheet is your copy of the service perfi rmed. Ensure that you & the dealer sign both 

copies.

Read this manual carefully and keep it in a convenient place for future reference. If at any 

time you require advice concerning your tractor, do not hesitate to contact your authorised 

Mahindra dealer. He has trained personnel, genuine Mahindra parts and necessary equip-

ments to undertake all your service requirements.

Mahindra USA lnc's. policy is one of continuous improvement, and the right to change pric-

es, specifi cations or equipments at any time without notice is reserved.

All data given in this book is subject to production variations. Dimensions & weight are ap-

proximate only and the illustrations do not necessarily show tractors in standard condition. 

For exact information about any particular tractor, please consult your Mahindra dealer.

Содержание 3016























Отзывы: