16
BA491701-en
Pos: 73 /Technische Dokumentation/Alle Geräte/Überschriften/Überschriften 1.1.1/S/Überschrift 1.1.1: Single-Betrieb @ 12\mod_1231750604943_75.docx @ 301400 @ 3 @ 1
4.7.2
Single Mode
Pos: 74 /Technische Dokumentation/Hebetechnik/00 HBZ Alle/Inhalte/Warnung!/Inhalt: Warnung - Einzelbetrieb RG @ 20\mod_1268321800281_75.docx @ 824738 @ @ 1
When operating the lift in Single mode, make sure the vehicle is not tilted. Otherwise the vehicle
may fall off the lift!
Pos: 75 /Technische Dokumentation/Papierkorb/Hebetechnik/Inhalt: Single-Betrieb (mit Warnung) RGE @ 20\mod_1268321049708_75.docx @ 824703 @ @ 1
Select "Single mode" by pressing this
button on the desired column.
Activation of this operating mode is
indicated by the lit LED on the selector
button and the letter S on the seven-
segment display.
The columns not in Single mode are
temporarily inoperative. This is indicated by
the letter A flashing on the seven-segment
display.
Use these buttons to raise or lower the lift.
or
Pos: 76 /Technische Dokumentation/Hebetechnik/00 HBZ Alle/Inhalte/Info!/Inhalt: Info - Verschiedene Hubsäulen RGE @ 12\mod_1231755449651_75.docx @ 301710 @ @ 1
The single mode can also be used for several columns simultaneously
Pos: 77 /Technische Dokumentation/Hebetechnik/00 HBZ Alle/Inhalte/Info!/Inhalt: Info - Single-Betrieb RGE @ 12\mod_1231756197190_75.docx @ 301735 @ @ 1
Height offsets between individual columns will be maintained after switch-over to automatic mode.
The offset can be removed either
– by equalizing the carriages in single mode or
– by lowering all carriages to bottom position in automatic mode.
•
Lift switches off once first carriage reaches upward travel stop.
Pos: 78 /-----Format-----/MANUELLER UMBRUCH Seitenumbruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1
