17
BA492401-en
Pos: 62 /Produktfamilien/Alle Geräte/Überschriften/Überschriften 1.1/H/Überschrift 1.1: Hubsäulen aufstellen, anmelden und verbinden @ 6\mod_1178277124484_75.docx @ 91204 @ 2 @ 1
3.5
Positioning, Logging in and Interconnecting the Columns
Pos: 63 /Produktfamilien/Hebetechnik/COLUMNLIFT/491901 RGA/BA/Inhalt: 4919 Hubsäulen aufstellen, anmelden und verbinden_12pt @ 56\mod_1560324806433_75.docx @ 3147418 @ @ 1
1 Push the support forks completely under the wheels or lift points of the vehicle
to be raised. Use the lift on a hard, level surface only.
2 Turn the main switch to position 1.
The "Auto" LED flashes.
3 Select the transmission channel. All
columns belonging to the same unit
must be set to the same channel.
4 Confirm using the operating mode
button.
The "Auto" LED lights permanently.
5 Repeat the procedure for all columns.
Number of columns within the unit is displayed.
Before closing the unit check the number of logged-in columns. After closing verify
that it corresponds with the number of columns appearing on the display.
6 Once all columns are logged in, close the unit
using button "0/1".
The "Column unit" LED lights up, lift is ready for
operation.
Pos: 64 /-----Format-----/MANUELLER UMBRUCH Seitenumbruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1
