MAHA MPJ 16.5/1200 2S Series Скачать руководство пользователя страница 9

Страница: 9 / 33

BA551501-en

1.6

Safety Instructions for Handling Hydraulic Fluid

CAUTION

•

Neutralise hydraulic fluid spills with binder.

•

Remove contaminated clothing immediately.

•

Inhalation: If symptoms persist, seek medical treatment.

•

Skin contact: Wash skin immediately with soap and water. If skin irritation
persists, seek immediate medical advice.

•

Eye contact: Rinse thoroughly with water and seek medical advice.

•

Ingestion: Do not induce vomiting. Seek immediate medical attention.

1.7

What to Do in the Event of Defects or Malfunctions

WARNING

•

If defects occur, such as the pit jack raising and lowering itself on its own or
distortion of the supporting components, immediately lower the lift or pro-
vide support.

•

In case of malfunction or repair disconnect the pit jack from the air supply
system.

•

Turn off the main switch and secure to prevent unauthorized use. Contact
the Service Department.

1.8

What to Do in the Event of an Accident

•

The injured person is to be removed from the danger area. Find out where
dressing and bandages are kept. Seek first-aid.

•

Provide first-aid (stop bleeding, immobilise injured limbs), report the accident
and seal off the accident site.

•

Immediately report any accident to your supervisor. Make sure a record is
kept of every occasion first-aid is provided, e.g. in an accident book.

•

Remain calm and answer any questions that may arise.

Содержание MPJ 16.5/1200 2S Series


































Результаты поиска

Содержание MPJ 16.5/1200 2S Series

Отзывы:

Бренды по названию

Популярные бренды

MAHA MPJ 16.5/1200 2S Series, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание MPJ 16.5/1200 2S Series

Отзывы:

Бренды по названию

Популярные бренды