Magus BASIKA rho NS 10, Инструкция по установке, эксплуатации и обслуживанию

Страница: 25 / 30

150331_IOM_GS_PE-LMD_BASIKA_rho_gb 25 von 30
5. Check (if available):
•
agitators, especially shaft seal and agitator blades for wear / damages
•
disposal pump, conveying performance and shaft seal
•
whether the pressure sensor is clean
•
cover seals
6. Prior to filling the plant remove the padlock at the main switch and turn the switch to
position „ON“.
7. Fill the plant with water:
•
After having executed the above works and prior to commissioning the plant again
the container is to be filled with water and a leakage test needs to be done.
8. Check all electric switching functions
9. The outer surface of the grease separator is rubbed in with maintenance oil.
10. Listing of required spare parts
11. Make a final report
If you wish our after-sales service to do the maintenance which will be charged separately
please get in touch with us.
Advice
We can only guarantee the performance of the plant if the prescriptions
EN 1825 – 2 regarding disposal and cleaning are observed.
The disposal of the content in the BASIKA grease separator in time and in regular intervals
guarantees a perfect performance. Fatty matters and grease coming from kitchens form
fatty acids quickly which may not enter the drains. Overstress (supply higher in ltrs./sec
than nominal size of the plant) also increases the percentage of fat in the waste water and
leads to clogging of the drains which is expensive to remove.