MAGUIRE Ultra-600, Установка, эксплуатация и обслуживание

Страница: 24 / 109

Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
24
ULTRA By Maguire

- Ultra Low Energy Dryer
Shutdown Options
End Preheat - (shown only if in a preheat cycle)
Skips the preheat allowing material to immediately pass
down to the Vacuum Chamber (example: material has
already been heated and dryer has been taking offline
briefly and powered back on).
At any point after the preheat cycle has ended (or forced to
end), pressing the red Shutdown button will bring up the
Shutdown Options screen with the following shutdown
options:
Shutdown
– Pressing the red ‘Shutdown’ button (after
preheat has ended) will prompt a series of shutdown options
Smart Stop
– With the ‘Smart Stop’ feature, the machine
will not add more material into the machine and
completely dry the remainder of the material in the
machine. At the end of the ‘Smart Stop,’ there will be no
material in the ULTRA which is essential for quick
cleanout.
Immediate Shutdown
– This causes an instantaneous,
yet controlled, complete shutdown of all systems within
the ULTRA (heater, blower, vacuum and purge system).
Cooldown & Shutdown
– When this feature is selected,
the ULTRA will gradually cool down the material in the
heating hopper to a desired temperature over a specific
designated time period.
Cancel - Exits the shutdown option screen
Pause
–
Press the Vacuum Chamber will display the
Vacuum Chamber Setup screen. Pause is the red button at
the bottom of the screen. Pauses the vacuum timer
indefinitely. To restart after a pause, press RESUME.
Auto Stop (must first be enabled)
–
Initiates a shutdown
at specified date and time. For further explanation on how
to set the Auto Stop date and time see page 25.