MAGUIRE LoPro, Инструкция по эксплуатации, Страница: 6 / 17

M A G U I R E P R O D U C T S , I N C .
Rev: January 15, 2019
6
L o P r o R e c e i v e r 
Status Indicator
The LoPro’s status indicator is a green LED located on the front panel of the controller.
Primarily, this is used to indicate if the unit is powered up, but also serves several other
purposes. As mentioned earlier, the status indicator is an integral part of setting the LoPro’s
running mode.
The status indicator will provide information about the LoPro during standard operation.
This can be a useful tool for troubleshooting. At any point when the LoPro is turned on, the
status indicator should be displaying 1 of 4 conditions. The following list describes each, and
explains what each one means:
•
Constantly Illuminated: Satisfied. Not calling for material, presumably hopper full.
•
1-Second flash rate: Waiting. Calling for material, but line is currently in use by
another receiver.
•
¼ Second flash rate: Loading. In the process of conveying material.
•
Rapid (1/20
th
second) flash rate: Alarming. Could be anywhere within the alarm
routine (see description on page 4).
Description of Controls