Maguire Products MLS Clear Vu, Установка, эксплуатация и обслуживание

Страница: 6 / 38

Maguire Products, Inc.
6
MLS Clear Vu

1 - Getting Started
Warranty
– Exclusive 5-Year
MAGUIRE PRODUCTS offers THE MOST COMPREHENSIVE
WARRANTY in the plastics auxiliary equipment industry. We
warrant each MAGUIRE Loading System manufactured by us to
be free from defects in material and workmanship under normal
use and service; excluding only those items listed below as
'excluded items'; our obligation under this warranty being limited to
making good at our factory any Dryer which shall, within FIVE (5)
YEARS after delivery to the original purchaser, be RETURNED
intact to us, transportation charges PREPAID, and which our
examination shall disclose to our satisfaction to have been thus
defective; this warranty being expressly in lieu of all other
warranties expressed or implied and of all other obligations or
liabilities on our part, and MAGUIRE PRODUCTS neither assumes nor authorizes any other persons to
assume for it any other liability in connection with the sale of its Dryers.
This warranty shall not apply to equipment repaired or altered outside MAGUIRE PRODUCTS INC.
factory, unless such repair or alteration was, in our judgment, not responsible for the failure; nor which
has been subject to misuse, negligence or accident, incorrect wiring by others,
or installation or use not in accord with instructions furnished by
Maguire Products, Inc.
Our liability under this warranty will extend only to equipment that is returned to our factory in Aston,
Pennsylvania, PREPAID.
Please note that we always strive to satisfy our customers in whatever manner is deemed most expedient
to overcome any problems they may have in connection with our equipment.
Disclaimer
Processing conditions and materials vary widely from customer to customer and from product to product.
Please be aware that it is IMPOSSIBLE for us to anticipate ALL conditions and requirements, or to be
certain that our equipment will perform properly in all instances. You, the customer, must observe and
verify the performance level of our equipment in your plant as part of your overall manufacturing process.
You must verify to your own satisfaction that this level of performance meets your requirements. We CAN
NOT be responsible for losses due to equipment not performing properly, even when due to equipment
malfunction or design incorrect for your requirements; and/or for any consequential losses due to our
equipment not meeting your requirements.
We will only be responsible to correct, repair, replace, or accept return for full refund if our equipment fails
for any reason, or we have inadvertently misrepresented our equipment for your application.
GETTING STARTED:
PROCEED TO: SAFETY WARNINGS NEXT PAGE