Section 1. Features and Specifications
3
RELATED DOCUMENTS
The IntelliStripe 60, TTL Insertion Reader will read cards that meet the standards defined by ISO
(International Standards Organization):
ISO 7811
Identification Cards - Mag-stripe Cards, Tracks 1-3
ISO 7810
Identification Cards - Physical Specifications (ID-1 Cards)
Available from ANSI, Phone 212-642-4900; www.ANSI.org.
For further information about magnetic stripe readers, refer to MagTek part number 99875148,
I/O Interface for TTL Magnetic Stripe Readers, Technical Reference Manual
.
This document presents the technical information from a hardware perspective only. Other
documents that cover the command set, communications protocol, and API (Application
Program Interface) are as follows:
Part Number Title
99875337
Triple Track ASIC With Shift-Out, 3V, Specifications
99875352
Encrypting SPI IntelliHead Technical Reference Manual
SPECIFICATIONS
Specifications for the Reader are listed in Table 1-1.
Table 1-1. Specifications
DATA FORMAT SPECIFICATIONS
Reader Configuration
Track 2
Track 1,2
Track 2,3
Track 1,2,3
Data Format Specifications*
ISO/ANSI/AAMVA/210bpi on TK2 formats
ISO/ANSI/AAMVA/210bpi on TK2 formats
ISO/ANSI/AAMVA formats
ISO/ANSI/AAMVA formats
* ISO (International Standards Organization), ANSI (American National Standards Institute), AAMVA
(American Association of Motor Vehicle Administrators)
OPERATIONAL
Card Speed:
3 IPS (7.62cm/sec) to 50 IPS (127cm/sec)
Recording Method
Two-frequency coherent phase (F2F)
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
