manualshive.com logo in svg

Magtek ExpressCard 2000, Руководство пользователя по установке и эксплуатации

Поделиться
Скачать
Magtek ExpressCard 2000 Скачать руководство пользователя страница 49

6 - Operation 

ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual 

 
Page 49 

The specific EC2000 features available to a user depend on the card personalization software, its 
configuration, and the configuration of the EC2000.  For setup and usage instructions for card 
personalization software, see the documentation for the software you are using.

  

6.11.3

 

About Transactions 

Every request a user sends to the EC2000 to process a card is sent as a 

transaction

.  Transactions contain 

instructions telling the EC2000 to perform one or more operations to the card.  Common transactions 
include issuing a new personalized card or changing the card PIN. 

6.11.4

 

About the Transaction Queue 

The EC2000 receives transactions from card personalization software either directly through a Local Area 
Network, or by polling an Internet site.  The card personalization software can send a transaction for 
immediate processing, or may direct the EC2000 to hold the transaction in a queue.   
 
When it receives queued transactions, the EC2000’s configuration determines whether it will immediately 
process them or hold them in the queue until a user signals the EC2000 to process them.  The EC2000 
indicates queued transactions need to be manually processed by showing “AutoProcess: OFF” in the 
lower right corner of the queue (see 

Figure 6-30

). 

 

Users will not be able to see or interact with queued transactions on the 

Status

 page unless 

the EC2000 is configured to display the transaction queue.  See section 

6.11.4 About the 

Transaction Queue

 and section 

8.9.1 About the QueueDisplay Configuration Option 

for details. 

 

Figure 6-30 - Status Page With Transaction Queue 

6.11.5

 

How to Process Transactions In the Transaction Queue 

To process the top transaction listed in the queue on the EC2000’s 

Status

 page, do one of the following: 

 

If you want to turn the AutoProcess ON so all future transactions will be processed automatically, 
press the 

Resume

 button. 

 

If you want to keep AutoProcess OFF so transactions will continue to be held in the transaction queue 
for manual processing, press the 

Print

 button. 

Содержание ExpressCard 2000





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды