6 - Operation
ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual
Page 34
Figure 6-12 - Final Closing of the Top Access Door
6)
Turn the key 90 degrees counterclockwise to lock the top access door, and remove the key.
7)
Pull up firmly on the top access door’s handles to make sure it is locked.
6.5.3
How to Use the Touchscreen to Unlock the Top Access Door
To
open
the top access door or the card access door from the front display panel, follow these steps:
1)
If the EC2000 is not already displaying the
Status
page, press the
Status
button.
2)
Press the
Menu
button to open the
Main Menu
page.
3)
Press the
Case/Door
button to open the
Unlatch Case/Door
page. If the
Case/Door
button is
grayed out, the touchscreen top access door unlock feature is disabled (see section
4)
Enter the required passwords when prompted.
5)
To unlock the top access door, press the
Unlock Top Door
button. The EC2000 will click and
display a countdown timer on the touchscreen, during which the top access door will remain
unlocked. When the countdown timer reaches zero, the electronic lock will re-engage.
6)
Open the door as described in section
6.5.2 How to Use the Keys to Unlock the Top Access Door
To
close
the top access door after using the touchscreen unlock feature, follow the steps in section
How to Use the Keys to Unlock the Top Access Door
, then gently press it closed until it is locked.
6.6
About Passwords and Asterisks
The EC2000 secures subsets of menu features using different passwords. The buttons for features that
require passwords are marked with an asterisk (*). The color of the asterisk indicates which password(s)
the user will be prompted for upon pressing the button. Password types, their associated asterisk colors,
and the general functions they secure are summarized in
If a user enters an incorrect password three times in a row, the device will go into lockdown mode to
prevent unauthorized use. Lockdown mode must be cleared by entering the administrator password.
