MAGSTIM NEUROSIGN V4, Руководство пользователя, Страница: 49 / 86

The Magstim Company Ltd.
©
49
NOP08-EN-10
• Select a profile and press to delete the profile from the system.
• Enter the profile password.
• Press ‘YES’ when prompted to permanently delete the profile and any associated
records.
b. Custom Procedure
Select or create a surgeon profile (see "a. Profile Management"). The procedure
management screen will then be displayed.
• Select a default procedure setup and press to duplicate that procedure. Type
in a name for this new procedure setup and press OK.
• This new procedure setup can now be edited by pressing .
• To edit an existing procedure setup select the procedure and press (a default
procedure setup cannot be edited and should be duplicated first).
Note: Procedures shown with the symbol are not supported by the connected
pre-amplifier, see page 54.
The procedure settings menu will now be displayed (See c. Procedure settings).
c. Procedure Settings
i. Channel settings tab
• Toggle each channel ON ( )
or OFF ( ).
• Select a label for each channel by
pressing and to scroll through the
alphabetical list. Default nerve branch
labels are built into the software.
• New label
Note: Once a label is created it cannot
be removed.
Figure 4.6. Channel settings tab - 8-Channel
Procedure.
• Press to create a custom label for the channel.