Unmounting Your Camera from the VPH-10
1
To unmount your camera, grasp the quick-release
lever and rotate it 180° so that the flat side presses
against the quick-release plate, and it locks into
place. This will release the plate, and it will pop up.
Slide the plate forward and pull up on it to remove
from the VPH-10. Release the thumbscrew on the
bottom of the plate and remove your camera.
Replace the plate on the VPH-10 by sliding it back
in place under the guides and pressing down firmly
until the lever snaps into the locked position.
5
For tightening or adjusting the Tilt/Pan bar, turn
the knob on the front of the VPH-10 clockwise to
tighten and, counterclockwise to loosen and adjust.
Once loosened, the Tilt/Pan bar can be rotated to a
more convenient or comfortable position.
• H x W x L
4.25” x 3.9” x 11.8” (10.8 x 10.9 x 3 cm)
• Weight:
12.8 oz. (363 g)
• Max. Load:
6 lb. (2.72 kg)
• Mount:
3/8” Tripod Mount
(1/4”-20 bushing included)
Specifications
Содержание VPH-10
Страница 1: ...Owner s Manual Video Tripod Head VPH 10...