MG E90T
User Manual
Factory Default
When your tablet encounters a major problem or the unlocking password is forgotten, the
Factory Default
can be employed to return to the ex-factory status. There are two kinds of
methods of setting the
Factory Default
:
Software
1.
On the homepage interface, click the menu key and pop up the setting menu.
2.
Click and select the
Setting
3.
Click and select the
Backup and Reset
4.
Click and select the
Factory Default
5.
Click and select the
Tablet Computer Resetting
6.
Wait for system resetting
Hardware
1.
The tablet should be off. The device can be turned off in one of three ways: 1) using the reset
button found below the Vol +/-‐ button, 2) allowing the battery to drain, or 3) holding down the
power button until prompted to turn the device off
2.
Press the Power and Volume + buttons simultaneously for 20 seconds
3.
When an Android logo with a blue circling atom appears, you should release the buttons
4.
The system recovery process will start and delete all information stored on the tablet. The
tablet will be restored to its original factory settings.
4
Connection Establishment
4.1
WIFI Connection
Your tablet can be connected onto Wi-Fi networks (802.11/b/g/n). In order to connect to a
WiFi network you need to do the following steps
On the homepage interface, Launch “Settings” applications;
1.
Click and select the
System Setting
;
2.
Click Wi-Fi and open wi-fi switch;
3.
After openingWi-Fi, the tablet automatically searches for available WiFi networks that
are in the range.
4.
Select the Wi-Fi access point of your interest and initiate a connection, if the password is
