Specification of H102 display
10 / 18
i.
ODO:
Shows the mileage accumulated by the user.
ii.
TRIP:
Display the user's cycling mileage. The single mileage will not
be cleared when power off. The user needs to reset the mileage
manually in the setting interface.
iii.
RANGE:
Remaining mileage. The remaining mileage is an estimate
that may differ from the actual ride.
6.3. Average speed and maximum speed display
Under the normal speed display interface, press the key and the key at
the same time to enter the average speed and maximum speed display
page, as shown below
˖
Average speed refers to the average speed of the vehicle up to the
moment of starting up, and the maximum speed is also the maximum speed
recorded so far in this starting up. After shutdown and restart, the average
speed and maximum speed start recording and calculation again.
Press any key once to exit the average speed and maximum speed
display.
