12
STOP
1.
Set up and level the trailer as described on page 10, and follow steps 1-3 on page 11.
2.
Remove the safety pin from the mast lock bar (R).
3.
Press the lower winch control toggle switch upward to
raise mast into the vertical position (S). Hold switch until
the mast lock is engaged. The mast lock bar should snap
into place automatically.
Note:
On light towers equipped
with the electric winch option, a limit switch on the mast
tube will disconnect power to the lower electric winch to
prevent deadheading the winch.
4.
Secure the lock with the safety pin (T).
5.
Press and hold the upper winch control toggle switch
upward to telescope the mast to desired height (U).
Extend the mast slowly, making sure that the coiled
electrical cord is extending at the top sections of the
mast. If, for any reason, the winch cable begins to
develop slack or any of the tower sections get stuck,
STOP IMMEDIATELY and contact an authorized service
center.
6.
The mast can be rotated by loosening the locking
knob at the bottom of the mast (W). Turn the mast
until the lights face in the desired direction and
then tighten the knob.
W
R,T
V
S
DETAIL W
DETAIL V
DETAIL T
DETAIL R
DETAIL S
DETAIL U
U
WARNING
Never raise or lower the mast while the
unit is operating! Never remove the safety
pin or mast lock while the tower is up.
Releasing the lock will cause the mast to fall.
RAISING THE TOWER WITH THE OPTIONAL ELECTRIC WINCH
CAUTION
Do not extend the mast beyond the colored mark
on top of the lower mast section (V). On light
towers equipped with the electric winch option, a
limit switch on the main mast section will discon-
nect power to the upper electric winch to prevent
over extending the mast.
Discount-Equipment.com
