4
Safety Instructions
•
Make sure that the system is electrically grounded. This prevents an electric shock when there is a leak
of electricity.
•
Use the system at 110 – 120 VAC, 220 – 240 VAC with a frequency of 50Hz to 60Hz. A fire may start or
the system may break down if a higher or lower voltage is used, or if an electric current with a
frequency that is not within the range of frequency stated above.
•
Do not place any objects on this system. A fire may start or electricity may leak if water or a foreign
object enters the system.
•
Handle the power cord with care. A fire may start or an electric shock may be caused if the cord is
damaged, broken, or processed, if a heavy object is placed on the cord, or if the cord is bent forcibly.
•
Do not pull the power plug out of or put it in the electric outlet using a wet hand.
Otherwise, an electric shock may be caused.
•
Do not remove the cover of this system. Otherwise, an electric shock or injury may be caused.
•
Do not remodel this system. Otherwise, a fire may break out or an electric shock may be caused.
•
If the system is used when it is in an abnormal condition, such as generating heat, emitting smoke,
and giving out a strange smell, a fire may break out or an electric shock may be caused. Turn off the
power switch immediately and then pull the power plug out of the electric outlet. Afterwards, report
the fault to your supplier.
•
If abnormalities such as the power cord generating heat and giving out a strange smell are found,
turn off the power switch immediately and then pull the power plug out of the electric outlet.
Afterwards, report the fault to your supplier.
•
If a foreign object enters the system, turn off the power switch first and then pull the power plug out
of the electric outlet. Afterwards, report the fault to your supplier.
•
If thunder approaches, pull the power cord out of the electric outlet to prevent a fire or breakdown
caused by the falling of a thunderbolt.
•
Do not let hairs, a necktie or necklace hang above the drive of the system.
Doing so may cause an injury.
•
Do not put the system on an unstable place such as a shaky stand or a slanted floor. Doing so may
cause the system to drop or fall down, causing an injury.
•
Do not put the system in a moist or dusty place. Doing so may start a fire or cause an electric shock.
•
Be sure to pull out the power cord while holding the plug. If the power plug is pulled out while
holding the cord, a fire may break out or an electric shock may be caused.
•
Be sure to pull the power plug out of the electric outlet first when moving this system.
Otherwise, the cord may be damaged, causing a fire or an electric shock.
•
Be sure to pull the power plug out of the electric outlet for safety purposes when this system is not
used for consecutive holidays or for other reasons.
Содержание MFM-PS
Страница 8: ...8 How to Use 1 Preparation 1 Install the rollers ...
Страница 16: ...16 Fine Adjustment for Table A ...
Страница 17: ...17 Fine Adjustment for Table B ...
Страница 21: ...21 ...