Magnum MD 309, Инструкция пользователя

Страница: 7 / 17

- 7 -
CONNECTING ADDITIONAL SOURCES TO THE MD 309 HYBRID
INTEGRATED AMPLIFIER
CAUTION
As standard practice, you should always turn off the main power to the MD 309
Hybrid Integrated Amplifier (found on the rear panel of the unit) whenever any
source component, interconnect or loudspeaker is being changed in your system.
1.
Using your RCA cables, balanced XLR cables, coaxial, or USB, plug the source(s)
into one of the inputs marked in the back of the MD 309.
2.
Power up you Hybrid Integrated Amplifier and set the input to match the input on
the rear of the unit that the other source is plugged into.
3.
With volume set to zero, power up the source, initialize the playback, and slowly
adjust volume to desired level.
SET UP THE MD 309 HYRBID INTEGRATED AMPLIFIER WITH AN
EXTERNAL HOME THEATER PROCESSOR
The MD 309 Hybrid Integrated Amplifier is equipped with a unity gain input (A3/SSP
Mode Input on the Pre-Amplifier section). This is a switchable input, meaning the
input can be used as a normal pre-amplifier input or in unity gain mode.
To Connect to a Home Theater Processor
1.
Turn all the power off to the 309 and unplug the power cord to the MD 309
Hybrid Integrated Amplifier.
2.
Connect your theater processor Main Left and Right interconnects into the MD
309 Hybrid Integrated Amplifier through the A3 input.
3.
Connect your Main Left and Right speakers to the MD 309 Hybrid Integrated
Amplifier speaker connections.
4.
Re-connect the power to the MD 309 Hybrid Integrated Amplifier. Push the
“POWER” button to the “ON” position.
5.
Turn the selector knob or use the remote to select input Aux 3.
6.
Hit the “set-up” button. On the left middle of the screen you will see Aux 3 lit up.